Now back from another camping trip on the Yuba River where owls hooted through the night and osprey glided above the water during the day. My focus has now shifted towards polishing the rough edges of my camper build on my 1985 Toyota Van. I personally like to go camping, I don’t like to wait for my van to be “perfect.” I’d rather spend time in remote areas then worrying about putting a final piece of trim up. With that said, I’ve taken some time off of work and with that time, I can make some aesthetic as well as functional improvements to the build.
My new friend Eric showed me a method of building some panels by wrapping the wood in cheap carpet. The key is to use carpet with no backing. I used some utility plywood (about 11 dollars for a 4’x8′) and bought some carpet 10’x12′ (60 dollars) to make the inside a little more cozy and polished. I also think the carpet/wood combo has some insulation properties as well as reducing outside noise. I attached the carpet with a staple gun to the wood then screwed the wood to the metal using self drilling/tapping screws meant for metal. An impact driver and the screws make this job easier. Do not use wood screws for this job or you will be having a heck of a time.